HK1212 SKF Drawn Cup Needle Roller Bearing 12x18x12

HK1212 SKF Drawn Cup Needle Roller Bearing 12x18x12
Zoom  Zoom

Brand:  SKF
Inside Diameter  12.00mm
Outside Diameter  18.00mm
Width  12.00mm

Availability  

  

Our Price:  £5.17(Exc. 20% VAT)(£6.20 Inc. VAT)
+
  (2 Reviews)

SKF


HK1212 SKF Drawn Cup Needle Roller Bearing 12x18x12 HK Series - Open Ends

Drawn Cup Needle Roller Bearings have a deep thin-walled outer ring with either open ends (HK series) or one closed end (BK series). They are designed for applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly. Drawn cup needle roller bearings generally run directly on a shaft, if the shaft cannot be hardened and ground they can be combined with an inner ring.

Sealed bearings are available in this range and use the following suffix:

  • RS - Seal on one side of the bearing
  • 2RS - Sealed on both ends

HK1212-SKF dimension chart - all dimensions in mm unless indicated.

dDBDynamic Load (kN)Static Load (kN)Reference speed (r/min)Limiting speed (r/min)
1218126.277.351600018000
Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
Perefct!
13 July 2022  | 

The bearing was exactly as described, best quality, it arrived quickly at a very reasonable price. Can't fault the bearing or the service. Highly recommended.

Was this helpful to you?  Yes  /  No


Rating:  
HK1212 SKF drawn cup needle roller bearing 12x18x12
25 April 2019  | 

These bearings were easily identified from the information on the website and ordering was straight forward. Delivery as described and I will use this company again when required.

Was this helpful to you?  Yes  /  No