6207-Z-NR SKF (6207ZNR) Deep Grooved Ball Bearing with Snap Ring Groove 35x72x17 One Metal Shield

6207-Z-NR SKF (6207ZNR) Deep Grooved Ball Bearing with Snap Ring Groove 35x72x17 One Metal Shield
Zoom  Zoom

Brand:  SKF
Measurement Unit  Metric
Inside Diameter  35.00mm
Outside Diameter  72.00mm
Width  17.00mm
Seals or Shields  One Metal Shield
Clearance  Standard

Availability  

  

Our Price:  £30.37(Exc. 20% VAT)(£36.44 Inc. VAT)
+
  (1 Review)

SKF


6207-Z-NR SKF (6207ZNR) Deep Grooved Ball Bearing with Snap Ring Groove 35x72x17 One Metal Shield, Supplied complete with Snap Ring

Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications. The main types are:

  • Open - Bearing without seals or shields, suitable for applications where lubricant will constantly flow through them i.e. gearboxes.
  • Metal Shields - Bearings fitted with steel shields and lubricated for life.
  • Rubber Seals - Bearings fitted with steel reinforced rubber contact seals which provide a better seal but add friction so are unsuitable for high speed applications, lubricated for life.
  • C3 - Radial internal clearence greater than normal
  • NR - Bearing with Snap Ring Groove and Snap Ring

6207-Z-NR SKF dimension chart - all dimensions in mm unless indicated.

Inside DiaOutside DiaWidthDynamic Load (kN)Static Load (kN)Limiting speed (r/min)
3572172715.313000
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
1951 Nash fixed
23 October 2015  | 

This bearing was an exact fit for a 1951 Nash 3 speed gearbox input shaft. Couldnt get this original part for love nor money. Such a good price. Thank you will use you again!

Was this helpful to you?  Yes  /  No